Asus RS100-E8-PI2 - Manual (Page 43)

2-25 ASUS RS100-E8-PI2
2.7 Removable/optional components
You may need to remove previously installed system components when installing or removing
system devices or you may need to install optional components into the system. This section
discusses how to remove/install the following components:
1.
System fans
2. Optical disk drive (optional)
3. ASUS ASMB7-iKVM (optional)
Ensure that the system is turned off before removing any components.
2.7.1 Chassis fans
To install the system fans:
1. Locate the screw holes for the system
fans on the chassis. They are located
just next to the heatsink.
2. Position the chassis fans to match the
screw holes on the chassis. Secure
the fans onto the chassis using the
provided screws.
3. Connect the chassis fan cables to
the onboard fan connectors labeled
FRNT_FAN2, and FRNT_FAN3.