Asus RS100-E8-PI2 - Manual (Page 74)

Chapter 5: BIOS setup 5-4
5.1.3 BUPDATER utility
The succeeding BIOS screens are for reference only. The actual BIOS screen displays may
not be the same as shown.
The BUPDATER utility allows you to update the BIOS file in a DOS environment using a
bootable USB flash disk drive with the updated BIOS file.
Updating the BIOS file
To update the BIOS file using the BUPDATER utility:
1.
Visit the ASUS website at www.asus.com and download the latest BIOS file for the
motherboard. Save the BIOS file to a bootable USB flash disk drive.
2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at
support.asus.com to the bootable USB flash disk drive you created earlier.
3. Boot the system in DOS mode, then at the prompt, type:
BUPDATER /i[filename].CAP
where [filename] is the latest or the original BIOS file on the bootable USB flash disk
drive, then press <Enter>.
A:\>BUPDATER /i[file name]CAP
• This feature supports USB flash disks formatted using FAT 32/16 on a single partition
only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
Load the BIOS default settings to ensure system compatibility and stability. Press <F5> and
select Yes to load the BIOS default settings.