Asus RS100-E8-PI2 User Manual
Page 34
Chapter 2: Hardware setup
2-16
9.
Prepare the SATA power cable and
the SATA signal cable bundled with
the SSD drive tray.
8.
Repeat step 6 - 7 to install the other
2.5-inch SSD.
11. Get a SATA signal cable and connect
it to the 2.5-inch SSD as shown.
12. Connect the other end of the SATA
signal cable to the SATA connector on
the motherboard.
13. Connect the 4-pin power connector
of the power cable to the 4-pin power
connector from the power supply.
2.5-inch SSD
SSD drive tray
SATA power cable
4-pin power connector
from the SSD power cable
from the power supply
SATA signal cable
10. Get a SATA power cable and connect
it to the 2.5-inch SSD as shown.
Use the SATA power cable that
comes with the SSD drive tray as
an add-on accessory.
Use the SATA signal cable that
comes with the SSD drive tray as
an add-on accessory.