Asus RS100-E8-PI2 - Manual (Page 49)

3-3 ASUS RS100-E8-PI2
2. Attach the second inner rail to the other side of the chassis and secure with three inner
rail screws.
3. Select one unit of space (1U) on the
rack where you wish to install the
server.
4. Place three (3) nuts on the front and
three at the back. Do the same to the
corresponding side of the rack.
Nuts
5. Adjust the length of the outer rail to
fit the length of the rack cabinet, then
fasten the two screws.
6. Secure the outer rail with two screws
at the front and rear of the rack
cabinet .
7. Find the corresponding 1U space
on the other side of the rack cabinet
then repeat steps 5 and 6 to attach
the other outer rail.