Asus RS100-E8-PI2 - Manual (Page 87)

5-17 ASUS RS100-E8-PI2
Compatible Mode [Disabled]
This item only appears when you set the SATA Mode Selection to [IDE]. This item
allow you to enable or disable the Compatible mode. Configuration options: [Disabled]
[Enabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Compatible Mode [Disabled]
S.M.A.R.T. Status Check [Enabled]
Serial SATA Port 0 HardDisk (250.0GB)
Software Preserve SUPPORTED
Serial SATA Port 1 HardDisk (250.0GB)
Software Preserve SUPPORTED
Serial SATA Port 2 HardDisk (250.0GB)
Software Preserve SUPPORTED
Serial SATA Port 3 HardDisk (250.0GB)
Software Preserve SUPPORTED
Serial SATA Port 4 HardDisk (250.0GB)
Software Preserve SUPPORTED
Serial SATA Port 5 ASUS DVD-E8 ATAPI
Software Preserve SUPPORTED
D e t e r m i n e s h o w
SATA controller(s)
operate.
5.4.4 System Agent (SA) Configuration
This allows you to change System Agent parameters.
VT-d [Enabled]
This allows you enable or disable VT-d function on MCH. Configuration options: [Enabled]
[Disabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
System Agent Bridge Name Haswell
System Agent RC Version 1.3.0.0
VT-d Capability Supported
VT-d [Enabled]
Enable NB Card [Disabled]
BDAT ACPI Table Support [Disabled]
VGA Priority [Offboard]
Memory Configuration
Check to enable VT-d
function on MCH.
Enable NB CRID [Disabled]
This allows you enable or disable NB CRID WorkAround. Configuration options: [Enabled]
[Disabled]
BDAT ACPI Table Support [Disabled]
This allows you enable or disable support for the BDAT ACPI table. Configuration options:
[Enabled] [Disabled]
VGA Priority [Offboard]
This allows you to prioritize between onboard and offboard video hardware.Configuration
options: [Onboard] [Offboard]