Asus RS100-E8-PI2 - Manual (Page 39)

2-21 ASUS RS100-E8-PI2
2.5 Expansion card
This system comes with a riser card. You need to remove the riser card and the expansion
slot bracket if you want to install an expansion card.
Unplug the power cord before installing or removing an expansion card. Failure to do so
may cause severe damage to the motherboard and other system components!
2.5.1 Installing an expansion card
To install an expansion card:
3. Remove one more screw to release
the metal slot cover from the
expansion card bracket.
2. Remove the screw to release the
expansion card bracket from the
chassis.
1. Hold the riser card and pull it
upwards to detach it from the PCI
Express slot on the motherboard.