Asus RS100-E8-PI2 - Manual (Page 129)

7-3 ASUS RS100-E8-PI2
6. Select YES from the following warning message then press <Enter>.
NO YES
WARNING !!!
ALL DATA ON THE FLOPPY DISKETTE WILL BE DELETED !!
DO YOU WANT TO CONTINUE ?
7. On the following Important message, select YES if an ASMB7 is installed, otherwise
select NO, then press <Enter>.
NO YES YES
<Important>
Please ensure ASMB7-iKVM is well installed on the
motherboard.
8. Insert the formatted diskette into the disk drive and press <Enter> to write the image to
the disk.
9. Press any key to continue when prompted.
The Create Driver Diskette Menu appears after the creation of the diskette is finished.
To create a RAID driver disk in a Windows ® environment:
1. Start Windows ® .
2. Place the motherboard support DVD in the optical drive.
3. Go to the Make disk menu, then select the type of RAID driver disk you want to create.
4. Insert a floppy disk into the USB floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.