YSI IQ S ENSOR N ET TriOxmatic 700 IQ (SW) - Manual (Page 43)

TriOxmatic
®
700 IQ (SW) Maintenance, cleaning, disposal, and replacement
5 - 21 ba76013e01 01/2012
5.6 Storage
Store the clean and dry sensor with its protective cap in place. Observe
the allowed temperature range (see chapter 7 T
ECHNICAL DATA ); the
sensor may be stored in any position.
5.7 Disposal
We recommend to dispose of the sensor without the membrane cap as
electronic refuse.
Caution
The ELY/A electrolyte solution irritates eyes, skin and mucus
membranes. If it comes into contact with the eyes, rinse
thoroughly with water and consult a doctor! During working
activities, always wear suitable protective gloves and protective
goggles/face shield! Follow the safety datasheet.
Disposal of the
membrane cap
Note
To dispose of the chemicals, follow the corresponding safety
datasheets. The safety datasheets can be obtained from YSI.
1 Before disposing of the membrane cap, unscrew it and rinse
with water.
2 Dispose of the membrane cap in the household refuse.