YSI IQ S ENSOR N ET TriOxmatic 700 IQ (SW) - Manual (Page 31)

TriOxmatic
®
700 IQ (SW) Maintenance, cleaning, disposal, and replacement
5 - 9 ba76013e01 01/2012
Precision
measurements
Recommendation: In order to carry out precision measurements, leave
the sensor to polarize for a longer period of time, e.g. overnight, and
recalibrate it the following day.
Note
In the following cases, you must refill the sensor once more:
 If there are large air bubbles
 If there are air bubbles on the gold working electrode
 For measurements at high water pressure, even if small air bubbles
are present. Otherwise, the membrane and, as a result, the
measuring characteristics could change.
 If the sensor cannot be calibrated.