YSI IQ S ENSOR N ET TriOxmatic 700 IQ (SW) - Manual (Page 25)

TriOxmatic
®
700 IQ (SW) Maintenance, cleaning, disposal, and replacement
5 - 3 ba76013e01 01/2012
Caution
Clean the membrane very carefully!
Make sure the membrane is not damaged, e.g. by sharp-edged
objects, by laying it on sharp stones, etc.
4 Carefully clean the sensor shaft and membrane as specified
in the C
LEANING AGENTS section.
5 Then, rinse it thoroughly with tapwater.
6 Also clean and rinse the protective hood.
7 Screw the protective hood back on again.