YSI pHotoFlex pH Handheld Colorimeter - Manual (Page 24)

Operation pHotoFlex
®
pH
24 ba76123e01 02/2013
 Messages
Information or instructions are marked by the
i symbol. They can-
not be selected.
Example:
The principles of navigation are explained in the two following sections
by reference of examples:
 Setting the language (section 4.3.3)
 Setting the date and time (section 4.3.4).
4.3.3 Navigation example 1: Setting the language
The following example describes in the language of the country how to
set the language. On delivery, English is set as the language in the
pHotoFlex
®
pH. During initial commissioning, the language is set in the
menu, Configuration / System / Language.
1 In the measured value display:
Open the Configuration menu with <MENU>.
The instrument is in the configuration mode.
2 Select the System menu with <> <>.
The current selection is highlighted as white text on a black
background.
3 Open the System menu with <START/ENTER>.
i Buffer recognition TEC
i Immerse sensor in buffer 1
Set temperature: 25 °C
Continue
pH & ORP
The
i symbol indicates
info texts, e.g.
messages, notes or instruc-
tions
Language : English
Store
Display
Reset
Interface
Continue ...
System