Xylem ProLab 1000 BENCH TOP pH METER - Manual (Page 19)

ProLab 1000 Operation
19 ba75576e04 01/2011
4 Operation
4.1 Switch the meter on and off
Switching on
Switching off
1 Press the <On/Off> key.
The display shows the meter designation and software version.
Subsequently, the access control display appears.
2 Start anonymous access with <MENU/OK>.
The meter switches to the measuring mode.
or
Place the electronic key on the read field and leave it there for
approx. 2 seconds until the key has been recognized.
The display shows the USER ID that was read.
3 Confirm the displayed data with <MENU/OK>.
The meter switches to the measuring mode.
[ i] Apply electronic key
or
Press OK (anonym. access).
Anonymous access
User
[ i] Identification successfull
[ i]USER ID = 9876543210
Register USER ID
USER ID: 1234567890
Erase
Output to RS232/USB
Continue
User
only with administrator login
1 Press the <On/Off> key.
The meter is switched off.