Xylem ProLab 1000 BENCH TOP pH METER - Manual (Page 31)

ProLab 1000 Operation
31 ba75576e04 01/2011
4.4.3 System
Overview The following sensor-independent meter features can be adjusted in
the system menu/System and its submenus:
z Menu language
z Beep on keystroke
z Display illumination
z Display contrast
z Unit of the temperature display
z Data interface
z Clock and date function
z Function to reset all sensor-independent system settings to the
default condition
Settings In the measured value display, open the system menu with <MENU/
OK
_
>. After completing the settings, switch to the measured value
display with <MODE>.
Menu item Setting Description
System / General /
Language Deutsch
English
(further) Select the menu language
System / General /
Beep On
Off Switch on/off the beep on
keystroke
System / General /
Illumination On
Off Switch the display illumination
on/off
System / General /
Contrast 0 ... 100 % Change the display contrast
System /
Measurement /
Temperature unit °C
°F Temperature unit, degrees
Celsius or degrees Fahrenheit.
All temperatures are displayed
with the selected unit.
System /
Measurement /
Stability control Auto
Off Switch on or off the automatic
Stability control (see page 32).
System / Interface /
Baud rate 1200, 2400,
4800, 9600,
19200 Baud rate of the data interface