Xylem MJK 713 Open Channel Flowmeter - Manual (Page 17)

17
Manual
US 3.10 713 Flow Converter 1210 - Sw 833062
MJK North America, Inc.
37 Sherwood Terrace, #126
Lake Bluff, Il 60044
Tel.: 847-482-8655
Fax: 847-482-8654
[email protected]
www.mjk.com
Display and keyboard
ENTER
This key allows you to
change between the main
menu to a sub-menu, as
well as between sub-
menus.
The key also allows you
to confirm the choice
from a sub-menu.
ALARM
Alarm record with the pre-
vious nine alarms incl. date
and time of occurrence.
Q(t)
Registers for flow rate:
- instantaneous value
- average flow rate for
the last 1 hour
- average flow rate today
- average flow rate for
the last 24 hours
Display
2 x 24 character back-
lit display for indication
of menus and values.
ESCape
This key allows you to change back to the main
menu or to undo a new choice. By pressing
the ESCape button two or three times, you will
return to the function indications. If you think
you are lost, or you think you made a mistake,
simply press this button a few times to start over.
However, the escape function is disabled when
choosing primary device.
MENU
By pressing the MENU key,
the display will change to
the next main menu.
Arrow keys
The arrow keys are used
for changing a current
setting.
Pressing the arrow keys
change the values up
or down. By pressing
the ”up” arrow keys, the
number in the display will
increase.
Pressing the ”down”
arrow keys will decrease
the value.
SAMPLE
Registration of:
- total number of samples
- number of samples today
- number of samples within the
last 24 hours
Σ Q(t)
Registers for:
- total flow
- total flow 1 hour
- total flow today
- total flow 24 hours
- 99 days log
Quick start
when MJK 713 is powered up for the first time, a quick
setup sequence will be initiated that will guide you
through the following basic settings needed for most
installations:
1: selection of primary device / flow calculation
formula
2: max. flow range
3a: ultrasonic transmitter distance
(applies to MJK 713 2500 /
System Package 1 only)
3b: hydrostatic sensor range
(applies to MJK 713 3000 /
System Package 2 & 3 only)
After these initial settings has been made, MJK 713 will
automatically begin to measure flow. If you wish to take
advantage of the flow converter’s many other advanced
functions, such as flow proportion sampling, the remain-
ing sections of this manual will help you to configure the
unit.