Xylem MJK 713 Open Channel Flowmeter - Manual (Page 20)

20
Manual
US 3.10 713 Flow Converter 1210 - Sw 833062
MJK North America, Inc.
37 Sherwood Terrace, #126
Lake Bluff, Il 60044
Tel.: 847-482-8655
Fax: 847-482-8654
[email protected]
www.mjk.com
Function keys
Flow key Q(t)
this key shows the values of the relevant flow, as well as
various average values.
F1 Flow
Press once for:
Here the instantaneous actual flow is shown. the flow is
calculated from the chosen Q(h)-formula. Measuring value
with time and date is indicated.
F2 Average flow 1 HR
Press twice for:
Here the average flow for the last full hour is indicated.
F3 Average flow today
Press three times for:
Here the average flow from 12:00:00AM to the current
time is indicated. the display is updated every second.
F4 Average flow 24 HR
Press four times for:
Here the average flow for the last full 24 hours is indicated
(12:00:00AM to 11:59:59PM).
Totalizer key SQ(t)
this key will give access to indication of summed quanti-
ties.
F5 Totalizer
Press once for:
Here the total quantity is indicated, from when the value
was last reset. the quantity is updated every second
and is indicated with time and date. the value is reset by
pressing enter.
F6 Totalizer 1 hour
Press twice for:
Here the summed quantity for the previous full hour is in-
dicated (e.g. 11:00AM -12:00PM).
F7 Totalizer today
Press three times for:
Here the summed quantity for today is indicated. the re-
sult along with the time interval is updated every second.
the value is reset by pressing enter.
F8 Totalizer 24 hour 99 days log
Press four times for :
Here the 24 hours summed quantity log is indicated. the
quantity and the date for the previous day are logged ev-
ery 24 hours (12:00:00AM). the log goes back 99 days.
the arrow keys are used for accessing the log.
note, that the MJK 713 must have been in service for
at least 24 hrs before the last 24 hr log will contain valid
data, and at least 99 days before the full 99 days log will
contain valid data.