Xylem MJK 713 Open Channel Flowmeter - Manual (Page 22)

22
Manual
US 3.10 713 Flow Converter 1210 - Sw 833062
MJK North America, Inc.
37 Sherwood Terrace, #126
Lake Bluff, Il 60044
Tel.: 847-482-8655
Fax: 847-482-8654
[email protected]
www.mjk.com
Menu key
this key gives access to the configuration menus with
readout and programming of the submenus.
A selection is made with the arrow keys (up or down) and
confirmed with the “enter” key. non-confirmed selec-
tions will flash in the display, whereas a current/confirmed
selection in shown non-flashing.
Level
Press MenU once for:
Here the measured level (level) and the value for the
analogue output (I) is indicated. the digital
outputs are indicated as D1-D5. “0” indicates non-
activated output, whereas “1” indicates activated
outputs.
Language
Press MenU twice for:
Change the language with the arrow keys and confirm
with enter.
Enter access code
Press MenU three times for:
the remaining configuration menus can be protected with
a 4-digit access code. enter the access code with the ar-
row keys and press “enter”. Double
arrows changes the first two digits, single arrows chang-
es the last two digits.
when the access code is keyed in, access to the remain-
ing configuation menus will be given for 5 min. since last
key pressed.
the access code 1111 can always be used.
Access denied
what happens when the wrong access code is keyed in:
It will not be possible to make changes in the setup. re-
turn to the previous chosen menu by pressing the eSC
key once.