Alpha Technologies PN-4 - Manual (Page 21)

21 031-103-B0-004, Rev. D
4.0 Installation, continued
4.2 Coaxial Cable to Service Power Inserter (SPI) Installation
4.2.1 SPI to Ground Bar Connection Procedure
Tools List:
•
1" Socket (3/8" drive)
• 3/8" Ratchet
• #2 Phillips Screwdriver
• Zip Tie Gun
1. Install SPI by tightening the attached coaxial
connector to the equipment tray.
2. Secure SPI ground wire to the SPI with attached
screw.
3. Terminate stripped end of wire at enclosure
ground bar.
Connector Fitting