Alpha Technologies PN-4 - Manual (Page 30)

031-103-B0-004, Rev. D 30
Fig, 5-8, IPP for One Power Supply Fig. 5-9, Breaker Duplex Option (BDO)
For single power supply
(NOT factory pre-wired)
Fig. 5-6, IPP for Three Power Supplies Fig. 5-7, IPP for Two Power Supplies
5.0 PN Series Options, continued
5.4 Input Power Panel (IPP)
There are four basic confi gurations of the IPP. Each is available in 120V and 240V. Units in
Figs 5-6, 5-7, and 5-8 are factory pre-wired, include Square-D high-magnetic breakers for
each power supply, and provide a GFCI convenience outlet.
5.5 Lightning Arrester (LA-P+)
The Lightning Arrester is available in 120Vac and 240Vac, and is installed by plugging it into
an IPP or BDO. The unit is operating properly when the green LED is lit.
Fig. 5-10, LA-P+ Installed in BDO Fig. 5-11, Location of LED on LA-P+