Alpha Technologies PN-4 - Manual (Page 24)

031-103-B0-004, Rev. D 24
Use a corrosion inhibitor (such as NCP-2) on battery terminals.
Battery Cable and
Crimp Connector
Battery Terminal
In-line Fuse Link
Washers & Bolt
Spacer
Fig. 4-14, In-Line Fuse Link Mounting, Flag Terminal Batteries
NOTE:
4.0 Installation, continued
4.4 Battery Terminal Connections, continued
Remove one 1" bolt from the Battery Cable Kit (BCK) hardware for making the fuse terminal
connection. For all other terminals, use the 3/4" hardware included with the batteries.
1" bolt from BCK
3/4" bolt
(included with
battery)
Fig. 4-13, Fuse Terminal Connection for Threaded Insert Batteries