B&K Precision 4052-4055 - Manual - Manual (Page 19)

19
channel.
Square
Freq/Period Configures the frequency or period of the waveform.
Ampl/HLevel Configures the amplitude or the high level of the waveform.
Offset/LLevel Configures the DC offset or the low level of the waveform.
Phase/EqPhase Configures the phase or set equal phase relative to the other
channel.
Duty Configures the duty cycle of the waveform.
Ramp
Freq/Period Configures the frequency or period of the waveform.
Ampl/HLevel Configures the amplitude or the high level of the waveform.
Offset/LLevel Configures the DC offset or the low level of the waveform.
Phase/EqPhase Configures the phase or set equal phase relative to the other
channel.
Symmetry Configures the symmetry of the waveform.
Pulse
Freq/Period Configures the frequency or period of the waveform.
Ampl/HLevel Configures the amplitude or the high level of the waveform.
Offset/LLevel Configures the DC offset or the low level of the waveform.
PulWidth/Duty Configures the pulse width or the duty cycle of the pulse.
Delay Configures the delay of the pulse waveform.
Noise
Stdev Configures the standard deviation of the noise waveform.
Mean Configures the mean value of the noise waveform.
Arb
Freq/Period Configures the frequency or period of the waveform.
Ampl/HLevel Configures the amplitude or the high level of the waveform.
Offset/LLevel Configures the DC offset or the low level of the waveform.
Phase/EqPhase Configures the phase or set equal phase relative to the other
channel.
Load Wforms Built-In – Access selectable built-in waveforms for output.
Stored Wforms – Access arbitrary waveforms stored in
internal memory for output.
Mod
AM Freq/AM
Depth/DSB
Freq/Key
Freq/FM
Freq/FM
Dev/PM
Freq/Phase
Dev/PWM
Freq/Width
Dev
Configures parameters for AM, FM, PM, ASK, FSK, DSB-
AM,PWM modulation.
Type Configures the type of modulation.
Shape Configures the modulating waveform shape.
Source Selects modulating source.
Sweep
SwpTime Configures the sweep time for sweep output.