B&K Precision 4052-4055 - Manual - Manual (Page 33)

33
Follow the steps below to browse and select a predefined arbitrary waveform.
1. Press the Arb button to enter the arbitrary waveform function menu.
2. Select 1/2 from the menu to go to the second page, then select Load Wform.
3. Select Built-In and there will be a table on the waveform display area and four
categories to select from the menu. Select Common to browse the common
waveforms. Select Math to browse the math waveforms. Select Project to browse
the special (project) waveforms. Select Winfun\Triangle to browse the window and
trigonometric waveforms.
4. After making the selection, use the up, down, left, or right arrow keys to select the
desired predefined waveform.
5. Once selected, press the Select option from the menu.
6. The generator will return to the main Arb menu and the waveform display area will
show the waveform shape of the selected pre-defined arbitrary waveform. For
example, below shows the display of the pre-defined Cardiac signal.
Generate User defined Waveforms
The generator has built-in non-volatile memory to store up to 10 user defined arbitrary
waveforms, each with a maximum of 16k points.