B&K Precision 4052-4055 - Manual - Manual (Page 53)

53
3. Press the menu function key corresponding to Browser again to change to File.
4. From the menu, change FileType to State.
5. Use the up and down arrow keys to move the selection cursor and highlight any item
(state memory locations) on the list from STATE1 – STATE 10.
6. Once selected, press the Save option from the menu to store current instrument
settings into the selected state memory location.
7. The screen will ask you to enter a file name. Use the rotary knob to change the
highlighted selection from the on-screen keyboard to select each character for the
file name. Once selected, press Select option from the menu to enter the
highlighted character. To delete characters, press Delete from the menu. To cancel,
press Cancel from the menu.
8. When finished, select Save from the menu. If saved successfully, a “Store state
success!” message will be shown. Wait a few seconds before the screen returns to
the Store/Recall main display.
9. Now, the selected state memory location will have a file name next to the STATE#:.
To recall stored instrument states:
10. Select File under Browser from the menu and use the up and down arrow keys to
select the state memory location.
11. From the menu, select Recall and the instrument settings saved at the selected
location will load. If loaded successfully, a message will be shown “Read finished,
read state success!”
Store to and Recall from External USB Drive
1. Configure the instrument with all the settings that you want to save, then press the
Store/Recall button.
2. From the Store/Recall menu, select Folder under Browser and select USB Device
(0:).
3. From the menu, change FileType to State.
4. Press the Save option from the menu.
5. The screen will ask you to enter a file name. Use the rotary knob to change the
highlighted selection from the on-screen keyboard to select each character for the