B&K Precision 4052-4055 - Manual - Manual (Page 72)

72
(relative to 100 kHz, 5
Vpp)
Cross Talk < -70 dBc
Offset Range (DC) Channel 1: ± 5 V into 50 Ω
± 10 V into open circuit
Channel 2: ± 1.5 V into 50 Ω
± 3 V into open circuit
Offset Resolution Up to 4 digits
Offset Accuracy ± ( |Offset setting value| * 1% + 3 mV)
Output Impedance 50 Ω (typical)
Output Protection Short-circuit protection
Waveform Characteristics
Harmonic Distortion
DC – 1 MHz, < - 60 dBc
1 MHz – 5 MHz, < -53 dBc
5 MHz – 25 MHz, < - 35 dBc
25 MHz – 50 MHz, < -32 dBc
Total Harmonic
Distortion
DC – 20 kHz at 1 Vpp, < 0.2 %
Spurious (non-
harmonic)
DC – 1 MHz, < -70 dBc
1 MHz – 10 MHz , < -70 dBc + 6 dB/spectrum phase
Phase Noise 10 kHz offset, - 108 dBc/Hz (typical)
Rise/Fall Time (Square) < 12 ns (10 % - 90 %) at full amplitude into 50 Ω
Variable Duty Cycle
(Square)
20% - 80% to 10 MHz
40% - 60% to 20 MHz
50% > 20 MHz
Asymmetry (50 % duty
cycle)
1% of period + 20 ns (typical,1 kHz, 1 Vp-p))
Jitter square) 0.1 % of period (typical, 1 kHz, 1 Vp-p)
Ramp Symmetry 0 % - 100 %
Linearity (Triangle,
ramp at 1 kHz, 1 Vp-p,
100% symmetry)
< 0.1 % of peak output (typical)
Pulse
Pulse Width 16 ns minimum,
8 ns resolution
Rise/Fall Time 7 ns (typical) at 1 kHz, 1 Vpp from 10 % – 90%
Duty Cycle 0.1 % resolution
Overshoot < 5 %
Jitter (pk-pk) 8 ns
Burst
Waveform Sine, Square, Ramp, Pulse, Arbitrary (except DC)
Type Cycle (1 – 50,000 cycles), Infinite, Gated
Start/Stop Phase 0 ° – 360 °
Internal Period 1 µs – 500 s
Gated Source External Trigger