CEMB USA C88 (A) - Manual (Page 10)

I 0607 - 10 GB
5 - INDICATIONS AND USE OF THE WHEEL BALANCER
The monitor shows several information and suggests various alternative ways of use to the operator.
This is through various “screens”.
5.1 - Initial screen ►
Buttons enabled:
: main functions screen (
MENU ACCESS DIAGRAM
)
: STATIC CORRECTION MODE selection
: balancing spin ( RESULT OF MEASUREMENT )
Dimensions gauge: when extracted, the Dimensions screen is selected (
PRESETTING OF WHEEL DIMENSIONS )
If the machine remains on the initial screen for a certain amount of time without being used, the system is automati-
cally switched to a screen-save. Striking of any key, movement of the wheel of distance + diameter gauge will cause
automatic switching from the screen-save menu to the initial screen. Automatic start-up operated by the protection
system is not available from the screen-saver for safety reasons.
5.1.1 - Screen-save screen
Name of the wheel balancer’s owner.
►