CEMB USA C88 (A) - Manual (Page 19)

I 0607 - 19
11
!,5
GB
In the event of automatic measurement of both sides, if the difference between the inner and
outer diameters is greater than or equal to 2”, the system sets the inner side spring weight.
To modify this presetting, press the button.
5.5.3 - Correction mode
After having performed automatic measurement of the inner side, it is possible to place the correction weights as
required by pressing pushbuttons
►
To display static unbalance, press the button on the measurement screen (for ALUS static, the inner side
diameter is always considered).
Possible types of correction:
Balancing of steel or light alloy rims with application of clip-on weights on the rim
edges
The STATIC mode is necessary for motorcycle wheels or when it is not possible to
place the counterweights on both sides of the rim.
Balancing of light alloy rims with application of adhesive weights on the rim shoulders.
Combined balancing: adhesive weight on the outside, clip-on weight
inside.
Combined balancing: clip-on weight outside and adhesive weight inside.
Balancing of alloy rims with hidden application of the adhesive weight on the outside.
Combined balancing: clip-on weight inside and adhesive hiddenweight outside
(Mercedes).