AT&T 7630 - Manual (Page 16)

1 5
Turning the System On/Off
The answering system must be on in order to use any answering system functions.
When the answering system is on, the Message Counter is on (a steady or flashing
display). To turn the answering system on, press
O on the base. The system
announces “The machine is on.”
To turn the system off, press O again. The system announces “The machine is off.”
Speaker Volume Control
Press + or - on the base to adjust speaker volume, from 0 (lowest) to 7 (highest).
If the volume setting is set to 7 and you press + , or if it's set to 0 and you press
- , you'll hear a beep to let you know you're already at the maximum or minimum
setting.
About Mailboxes
This answering system offers you 2 voice mailboxes, providing a convenient way
to share an answering system with other members of your household or business.
Callers using a touch tone phone can select the mailbox in which their messages
will be recorded by pressing 1 or 2 after the system answers the call. Those not
using a touch tone phone, or those who do not press 1 or 2 can still leave messages;
those messages are automatically recorded in Mailbox 1.
Setting the Clock
You’ll need to set the clock so it can record the day and time that each message
is received.
1 Press C. The Message Counter displays CH.
2 Press L. The system announces the current day setting.
3 To change the day setting, hold down n or N
until the correct day is announced. Then release the button.
4 Press L. The system announces the current hour setting.
5 To change the hour setting, hold down n or N
until the correct hour is announced. Then release the button.
6 Press L. The system announces the current minutes setting.
7 To change the minutes setting, hold down n or N
until the correct minutes are announced. Then release the button.
8 Press L. The system announces the new day and time.
To check the current clock setting, press L.
ANSWERING SYSTEM SET-UP
7630_book.1AT&T 8/12/98, 6:29 PM 15