AT&T 7630 - Manual (Page 9)

8
Making a Call
1 Press P on the handset (the PHONE light goes on).
2 When you hear a dial tone, dial the number.
Answering a Call
If the handset is in the base, lift the handset. The PHONE light goes on and the call
is connected.
— OR —
If the handset is away from the base, press
P on the handset. The PHONE
light goes on and the call is connected.
NOTE: Although ringing stops when you answer, you might not be able to hear
the other party until the PHONE light goes on steadily.
Ending a Call
Press P on the handset
— OR—
Place the handset in the base
Handset Volume Control
The handset volume can be set to three different levels. Each time you press V
on the handset the level of what you hear through the handset changes. Changing
this setting does not affect what the other party hears.
Flash
Press F to activate custom-calling services such as Call Waiting or 3-Way
Calling. You may have to press other buttons before or after F as explained in
the custom-calling instructions provided by your local phone service company.
Redial
The last number dialed (up to 16 digits) on this phone is stored in redial memory
until you dial another number.
1 Press P and wait for the PHONE light to go on.
2 When you hear a dial tone, press R.
TELEPHONE OPERATION
At the Handset
7630_book.1AT&T 8/12/98, 6:28 PM 8