4 general information, 4general information – Burkert Type 2012 User Manual
Page 6
6
Generalinformation
Type 2012
risk of burns!
The surface of the device may become hot during long-term
operation.
▶ Do not touch the device with bare hands.
general hazardous situations.
To prevent injury, ensure:
▶ That the system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
▶ The device may be operated only when in perfect condition and
in consideration of the operating instructions.
▶ The general rules of technology apply to application planning and
operation of the device.
To prevent damage to property of the device, ensure:
▶ Supply the media connections only with those media which are
specified as flow media in the chapter entitled “7 Technical Data”.
▶ Do not put any loads on the valve (e.g. by placing objects on it
or standing on it).
▶ Do not make any external modifications to the valves.
▶ Do not paint the body parts or screws.
4
general infOrmaTiOn
4.1
contact address
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
international
Contact addresses are found on the final pages of the printed oper-
ating manual.
You can also find information on the Internet under:
4.2
Warranty
The warranty is only valid if the device is used as authorized in accor-
dance with the specified application conditions.
4.3
information on the internet
The operating instructions and data sheets for Type 2012 can be found
english