Burkert Type 3004 - Manual (Page 13)

13
Technical Data
6. TECHNICAL DATA
6.1. Conformity
The explosion-protected electric rotary actuator Type 3004 conforms to the EC Directives according to the Dec-
laration of Conformity.
6.2. Standards
The following standards satisfy conformity with the EC Directives:
• EN 61000-6-4, EN 61000-6-2, EN 61010-1, EN 60079-0, EN 60079-1, EN 61241-0, EN 61241-1,
EN 60730-1, EN 60730-2-8
6.3. Approval
The approval mark found on Bürkert type label refers to the Bürkert products.
6.4. Operating Conditions
Ambient temperature: -20 °C ... +70 °C
Permitted air humidity: <70%
Permitted application area: 0 – 2000 m height
Protection class: IP67 in accordance with EN 60529 with cable bushing ISO 20 or protective
flap
Use only ATEX-approved cable bushings.
The temperature class and safety label of ATEX approval changes from T6 to
T5 for the emergency current model and the 400 V model.
NOTE!
• Avoid heat sources which may result in the permitted temperature range to be exceeded.
6.5. Identification
The rotary actuator is fitted with a rating plate which uniquely identifies the device and indicates the most important
technical data.
Do not remove the rating plate from the rotary actuator!
It is essential for identification when installing and servicing the device.
The warranty is void without the rating plate.
English
Type 3004