Burkert Type 3004 - Manual (Page 34)

34
Start-Up
10. START-UP
10.1. Safety instructions
WARNING!
Danger due to improper operation!
Improper operation may result in injuries as well as damage to the device and the area around it.
• Before start-up, ensure that the operating personnel are familiar with and completely understand the contents of
the operating instructions.
• In particular observe the safety instructions and intended use.
• The device/the system may be started by adequately trained personnel only.
10.2. Procedure
→
Ensure that connections and settings are implemented properly according to chapter “7. Installation”.
→
Check whether the rotary actuator and the fitting are in a defined end position, otherwise the fitting may lock.
In this case the actuator switches off automatically.
English
Type 3004