ADTRAN Total Access 1240 - Manual (Page 126)

Total Access 1240 Installation and Maintenance Practice
5-86 61179605L5-5B
SHDSL Loop 1 Remote Loopback Menu
The SHDSL Loop 1 Remote Loopback menu (see
Figure 5-67 ), is used to perform and view
remote loopback tests. For troubleshooting purposes, the Total Access 1240 provides three
types of remote loopbacks:
• Dual-Sided
• Customer
• Network
Figure 5-67. SHDSL Loop 1 Remote Loopback Menu
The SHDSL Loop 1 Remote Loopback menu options are shown in Table 5-60 .
Table 5-60. SHDSL Loop 1 Remote Loopback Menu Options
Option Description Function
1 Dual-Sided This option is used to initiate a remote dual-sided
loopback. For more information, refer to
“Remote Dual-
Sided Loopback” on page 5-87.
2 Customer This option is used to initiate a remote customer
loopback. For more information, refer to
“Remote
Customer Loopback” on page 5-87.
3 Network This option is used to initiate a remote network
loopback. For more information, refer to
“Remote
Network Loopback” on page 5-87.
09/01/05 00:06
Total Access 1240
SHDSL Loop 1 Remote Loopback
1. Dual-Sided
2. Customer
3. Network
Selection:
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help