ADTRAN Total Access 1240 - Manual (Page 43)

Section 5, User Interface - Logging on to the Total Access 1240
61179605L5-5B 5-3
LOGGING ON TO THE TOTAL ACCESS 1240
To login to the Total Access 1240 system, perform the following steps:
1. Establish the physical connection to the Total Access 1240.
2. If a craft port session is being used, proceed to step
3 . If using a Telnet session proceed to
step 4 .
3. Press
C TRL +R
until the Login prompt appears.
The Login screen is displayed in Figure 5-2 . The Total Access 1240 system requires the
login name and associated password.
4. Enter the default login name, “ADMIN” (or the configured login name with System
Administrator privileges), and press
E NTER
.
5. Enter the default password, “PASSWORD” (or the configured password), and press
E NTER .
Figure 5-2. Login Screen
NOTE
The Login name and Password fields are case sensitive. The default
values are all uppercase. For more information, refer to
“Password
Control Menu” on page 5-36.
Total Access 1240 - IPoE Fed
Login: ADMIN
Password: ********