ADTRAN Total Access 1240 - Manual (Page 96)

Total Access 1240 Installation and Maintenance Practice
5-56 61179605L5-5B
NOTE
The SNMP version should match the agent used for SNMP on the
network management side.
4 Version This option is used to configure the SNMP version for the
second SNMP trap host.
Options include the following:
• SNMPv1
• SNMPv2
5 IP Address This option is used to configure the third SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
6 Version This option is used to configure the SNMP version for the
third SNMP trap host.
Options include the following:
• SNMPv1
• SNMPv2
7 Trap Port This option is used to configure the SNMP trap port.
The trap port is defaulted to port 162 and is
provisionable for cases in which port 162 is blocked.
Table 5-40. SNMP Trap Hosts Menu Options (Continued)
Option Description Function