ADTRAN Total Access 1240 - Manual (Page 60)

Total Access 1240 Installation and Maintenance Practice
5-20 61179605L5-5B
The Router Dest Mac Filtering Menu (see Figure 5-14 ) is used to select a Port and Bridge,
enable or disable MAC filtering, and set up to 5 MAC Addresses.
Figure 5-14. Router Dest Mac Filtering Menu
The Router Dest Mac Filtering Menu options are described in Table 5-10 .
Table 5-10. Router Dest Mac Filtering Menu Options
Option Description Function
1 Port This option is used to select a port between 1 and 24.
2 Bridge This option is used to select a bridge between 1 and 4.
3 MAC Filter This option is used to either enable or disable Mac
filtering.
4 Save Changes This option is used to save configuration changes made
within this menu.
This option must be used to implement any provisioning
adjustments.
5-9 Router MAC Addr These options are used to enter non-Multicast MAC
Addresses in Hex format in the following format:
XX:XX:XX:XX:XX:XX
Total Access 1240 - IPoE Fed
Unacknowledged Alarms: None
Router Dest Mac Filtering
1. Port 9
2. Bridge 1
3. MAC Filter Disabled
4. Save Changes SAVED
5. Router MAC Addr 1 No MAC Address
6. Router MAC Addr 2 No MAC Address
7. Router MAC Addr 3 No MAC Address
8. Router MAC Addr 4 No MAC Address
9. Router MAC Addr 5 No MAC Address
Selection :
'J' - Jump to Provisioning 'N' - Next Port 'P' - Previous Port
'?' - System Help Screen