ADTRAN Total Access 1240 - Manual (Page 25)

Section 3, Installation - Mounting the Total Access 1240
61179605L5-5B 3-3
MOUNTING THE TOTAL ACCESS 1240
The Total Access 1240 is shipped with two sets of mounting brackets that accommodate either
a 19-inch or 21-inch rack.
• The mounting brackets used for a 19-inch rack are part number 3265540-1.
• The mounting brackets used for a 23-inch rack are part number 3265540-2.
The mounting brackets provide for flush or mid-mounting configurations. Figure 3-1 shows
the Total Access 1240 mounting bracket installation options. Four screws (supplied with the
unit) are required for mounting the brackets to the system.
Figure 3-1. Mounting Brackets
FRONT
BACK
P/N 3265540-1
Mounting brackets - 19-inch rack
FRONT
BACK
P/N 3265540-2
Mounting brackets - 23-inch rack