ADTRAN Total Access 1240 - Manual (Page 63)

Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-23
Ethernet Provisioning Menu
The Ethernet Provisioning menu (see
Figure 5-16 ) is used to configure the Ethernet port. The
Ethernet port is used to connect the Total Access 1240 to a network.
Figure 5-16. Ethernet Provisioning Menu
The Ethernet Provisioning menu options are shown in Table 5-13 .
Table 5-13. Ethernet Provisioning Menu Options
Option Description Function
1 Duplex Mode This option displays the “Duplex Mode Menu” on page
5-24.
2 Speed This option displays the “Speed Mode Menu” on page
5-25.
Total Access 1240 - IPoE Fed 09/01/05 03:44
Unacknowledged Alarms: None
Ethernet Provisioning
1. Duplex Mode Full Duplex
2. Speed 100Base
Selection :
Ethernet Link: Not Active
'?' - System Help Screen