6 attach filter module to the module carrier – Hach-Lange FILTRAX eco User Manual
Page 28
Advertising
28
Installation
3.6 Attach filter module to the module carrier
Refer to section
3.7.1 Filter module on page 29
.
Figure 18 Sample pressure tube connection
1
FILTRAX eco sample pressure tube
4
4/6 tube
2
Sleeve
5
2/4 tube
3
Large fitting
N O T I C E
The filter module should only be unpacked directly before
commissioning and then quickly attached to the module carrier. The filter
membranes are shrink-wrapped in protective plastic; once they have
been moistened they must not be allowed to dry out.
N O T I C E
The membrane surface is very sensitive!
Advertising