7 commission the instrument, 1 filter module – Hach-Lange FILTRAX eco User Manual
Page 29
Advertising
29
Installation
3.7 Commission the instrument
3.7.1 Filter module
Once installation is complete, the FILTRAX eco can be
commissioned.
1. Make sure that the pump cassette is correctly engaged in the
control unit (refer to
Figure 11 Click pump cassette into place
).
2. Unpack the filter module and hook onto the module carrier
using the karabiner (refer to
Figure 19
, item
3. Connect the sample tube in accordance with
Figure 19
.
4. Connect the control unit to the mains and set the instrument
parameters (refer to
).
Note: The black 3 mm tube that protrudes from the filter module is not
required when a FILTRAX eco is used.
N O T I C E
Do NOT touch the sensitive filter membrane.
Advertising