Micromod RetroPAK: SLC Configuration Manual - Manual (Page 276)

Command Series Migration to MOD 30ML
Function Code 36 – Qualified OR
To specify the value of S9, open the EX block and click on the Inputs tab. Double-click
on the number for S9. See the figure below. Type a value for S9 in the Specify Input
Data field.
Figure 36 .2.
Function Code 36
Input
Configuration
To specify the value of S10, open the EX block and click on the Inputs tab. Double-click
on the number for S9. See the figure below. Type a value for S10 in the Specify Input
Data field.
36 - 2