Micromod RetroPAK: SLC Configuration Manual - Manual (Page 46)

Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
Figure 2 .11.
Choose
Instrument
Version
• Select MOD 30ML 2 from this list as our instrument version by clicking on it and then
click on the Close button.
• The Configurator will redisplay as shown below. The instrument database will be opened
on the right frame and the environment blocks (IF, SE, ST and DIF) for the MOD 30ML
database will be loaded.
Notice that the newly created document PIDLab is shown in the project tree attached to
the Project Class.
Figure 2 .12.
Default Instrument
Database
The algorithm blocks belonging to the instrument version selected will be shown as a
menu on the left frame.
2 - 8