7 time functions, 1 time and date calendar chip programming, 2 call forward phone number programming – DoorKing 1812 Access Plus User Manual
Page 41
1812-162-M-1-12
39
2.7 Time Functions
2.7.1 Time and Date Calendar Chip Programming
This programming sequence programs the calendar chip in the 1812 system for the current time and date. The calendar
chip must be programmed if any of the time related features are going to be used.
Note: The clock / calendar chip in the 1812 Access Plus will keep time for approximately 48 hours if power to the system is
lost or removed. If power is off longer than this, the clock / calendar chip will have to be reprogrammed.
Example: Saturday, February 14th, 2010, 11:30 AM.
1. Press
*
3 3 and enter the MASTER CODE. [
*
3 3 _ _ _ _ (beep)]
2. Enter the current hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
3. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
4. Enter the month (01 to 12), day of the month (01 to 31) and the year (00 to 99), then press
*
.
[ _ _ _ _ _ _
*
(beep)]
5. Enter the day of the week (1-7), then press
*
. [ _
*
(beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
6. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
1.
*
3 3 _ _ _ _ (beep)
2. 1 1 3 0
*
(beep)
3. 0
*
(beep)
4. 0 2 1 4 1 0
*
(beep)
5. 7
*
(beep)
6. 0 # TOGETHER (beeeeeep)
Your Master Code -
Time -
AM -
Date -
Day -
End Programming -
2.7.2 Call Forward Phone Number Programming
These steps program the call forward telephone number into the 1812 memory. Call forward can only be used when the
1812 is programmed in phone mode (see 2.4.1). To turn ON/OFF or setup a time zone activation for the call forward see
2.7.3 on the next page.
1. Press
*
1 0 and enter the MASTER CODE. [
*
1 0 _ _ _ _ (beep)]
2. Enter the phone number where calls from the 1812 are to be forwarded to (up to 20 digits, no dashes),
then
press
*
. [ _ _ _ _ _ _ _ _ _ _ _
*
(beep)]
All 20 spaces do not have to be populated with numbers.
3. Press 0 # TOGETHER to end. [0 # (beeeeeep)]