4 do not disturb time zone programming, 3 call forward - on/off or time zone activation – DoorKing 1812 Access Plus User Manual
Page 42
1812-162-M-1-12
40
2.7.4 Do Not Disturb Time Zone Programming
Factory setting in step 2 is 0 (DND Off).
The Do Not Disturb (DND) feature allows the resident to program a time zone when they do not want the 1812 to ring the
house phones or to call forward when the call button on the unit is pressed. For example, a resident may program a do not
disturb time zone from 10 PM to 7 AM on certain days of the week, or all seven days. Only one DND time zone can be
programmed. Once the DND time zone has been programmed, it can be turned ON or OFF as needed.
1. Press
*
3 4 and enter the MASTER CODE. [
*
3 4 _ _ _ _ (beep)]
2. Press 0
*
to turn DND OFF, OR press 1
*
to turn DND ON. [ _
*
(beep)]
You can terminate here (Go to step 8 to finish) if you have previously programmed the DND schedule
and only ON / OFF is desired.
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
4. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
6. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
7. Enter the days of the week that the DND is to be active, then press
*
.
[ _ _ _ _ _ _ _
*
(beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the DND to be active only on Saturdays and Sundays, enter 1 7
*
. The order of the
numbers is not important; 17 is the same as 71.
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2.7.3 Call Forward - ON/OFF or Time Zone Activation
This programming sequence turns the call forward feature ON/OFF or setup a time zone activation. You must have a
call forward phone number programmed into the 1812 memory (See 2.7.2).
1. Press
*
3 7 and enter the MASTER CODE. [
*
3 7 _ _ _ _ (beep)]
2. Press 0
*
to turn call forward OFF, OR press 1
*
to always call forward, OR press 0
*
to call
forward per the call forward time zone. [ _
*
(beep)]
You can terminate here (Go to step 8 to finish) if you have previously programmed the time zone
and only ON / OFF or Call Forward per the time zone is desired.
3. Enter the beginning hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
4. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
5. Enter the ending hour (01 to 12) and minutes (01 to 59), then press
*
. [ _ _ _ _
*
(beep)]
6. Press 0
*
for AM OR press 1
*
for PM. [ _
*
(beep)]
7. Enter the days of the week that the call forward time zone is to be active, then press
*
.
[ _ _ _ _ _ _ _
*
(beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7) but all 7 spaces do not have to be populated with numbers.
For example, for the call forward to be active only on Saturdays and Sundays, enter 1 7
*
.
The order of the numbers is not important; 17 is the same as 71.
8. Press 0 # TOGETHER to end. [0 # (beeeeeep)]