Fulton Ancillary Equipment SteamPac Unfired Steam Generators - Manual (Page 51)

Fulton Thermal Corp.*SteamPac Unfired Steam Generators Manual* Version 2010-0201
Page 51
1. Reset and inspect pump and motor for proper operation.
6. Problem: Motor fails to start.
Check:
1. Make certain boiler level switch is functioning properly.
2. Check control circuit for continuity.
7. Problem: Preheat kit solenoid valve does not open.
Check:
1. Check wiring to the solenoid valve and aquastat.
2. If faulty, replace solenoid and/or aquastat.