Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM - Manual (Page 11)

Section 2: Company Service Information
11/12 11 51182 Rev. 2
PHASES OF INSTALLATION
The complete installation consists of the following phases:
A. Pre-Installation Checklist
B. Unpacking and Equipment Checkout
C. Equipment Location and Safety
D. Users’ Training and Responsibilities
Pre-Installation Checklist
The following points should be checked and discussed with the Area Sales Manager
and/or customer, if necessary, before the technician goes to the site and installs the
equipment.

Check the customer's application to make certain it is within the capabilities and
design parameters of the equipment.

If the installation process might disrupt normal business
operations, tell the customer and ask that they make ample
arrangements.

Is properly-grounded power available at the installation
location?

Be sure that the equipment operator(s) are available for
training.

The Service Technician must thoroughly review the installation procedures.

The service technician reviews the recommended setup with the Area Sales
Manager or Area Service Manager, and together they identify all necessary
variations to satisfy the customer's particular application.