Module installation steps, continued – Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM User Manual
Page 17
Advertising
Section 3: Installation
11/12
17
51182 Rev. 2
MODULE INSTALLATION
STEPS, CONTINUED
3. Set the Exit Approach
concrete frame.
4. Starting from one end of
the scale, set up the
Approach Concrete
Frame.
─
Line up the Approach
to match the chalk
lines.
5. Set the Steering Axle
Scale adjacent to the
Approach Concrete
Frame.
─
Line up the Steering
Axle Scale and the
Approach Concrete
Frame to match the
chalk lines.
6. Fasten the Steering Axle
Scale to the Approach
Concrete Frame using the
supplied hardware specified
on the
Fairbanks
Certified Drawings.
10’ X 10’ Exit Approach Concrete Frame
Place the Steering Axle Scale adjacent to
the Approach Concrete Frame.
Advertising