Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM - Manual (Page 16)

Section 3: Installation
11/12 16 51182 Rev. 2
MODULE INSTALLATION STEPS
Preparing the Scale Frame
1. Lay out the scale.
2. Mark chalk lines on the flat, level surface .
a. Mark the center line of the scale first.
b. Mark the edges of the scale.
c. Refer to the
Fairbanks Certified Prints for
exact dimensions.
Lifting the Scales, Frames and Ramps
─
When moving the elements of the scale assembly, place the hooks of the
straps or chains into the specific lifting points.
Scale and frame lifting points Ramp lifting points