Module installation steps, continued – Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM User Manual
Page 19
Section 3: Installation
11/12
19
51182 Rev. 2
MODULE INSTALLATION STEPS, CONTINUED
13. Set the next Concrete
Dead Space Frame at the
end of the Concrete Dead
Space Frame.
─
Line up the Concrete
Dead Space Frame to
match the chalk. lines.
14. Bolt the Concrete Dead
Space Frame to the Drive
Axle Scale.
15. Place the Trailer Axle Scale
against the Concrete Dead
Space Frame.
─
Line up the Concrete
Dead Space Frame to
match the chalk. lines.
16. Bolt the Trailer Axle Scale
to the Concrete Dead
Space Frame.
17. Set the Approach Concrete
Frame at the end of the
Trailer Axle Scale.
─
Line up the Drive Axle
Scale to match the
chalk. lines.
18. Bolt the Approach Concrete
Frame to the Trailer Axle
Scale.
Place the Trailer Axle Scale against
the Concrete Dead Space Frame.
Place the Approach Concrete Frame
against the Trailer Axle Scale.