Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM - Manual (Page 27)

Section 4: Wiring
11/12 27 51182 Rev. 2
Intalogix
™
Systems Installation, Continued
Load Cell Wiring Designations
Color Description
Black (
─) Excitation
Green (+) Excitation
Red (
─) Signal
White (+) Signal
Yellow Shield
Interconnection Wiring
TB3 or TB4 in SSC Function 17246 Cable
1 (-) 8.0 volts Black
2 (+) 8.0 volts Green
5 DC Return Blue
6 Shield Shield
7 RS-485 (+) White
8 RS-485 (-) Red
Dip (Address) Switch Setup, SSCs
• In each of the SSC
boxes, there is a ten
(10) position dip switch
labeled
S1 .
─
This switch is used
to identify the
section in a binary
code.
• The switches must be
set properly for the
scale to operate.
NOTE: Switches 1, 2, 3, 4, are always OFF .
SW 1 position 5 setting:
OFF = 350
Ω load cells
ON = 700/1000
Ω load cells