Fairbanks MATRIX SCALE HIGHWAY SCALE SYSTEM - Manual (Page 18)

Section 3: Installation
11/12 18 51182 Rev. 2
MODULE INSTALLATION
STEPS, CONTINUED
7. Set the Concrete Dead
Space Frame at the end
of the Steering Axle Scale.
─
Line up the Concrete
Dead Space Frame to
match the chalk lines.
8. Bolt the Concrete Dead
Space Frame to the
Steering Axle Scale.
9. Set the Drive Axle Scale
at the end of the first
Concrete Dead Space.
─
Line up the Drive Axle
Scale to match the
chalk. lines.
10. Bolt the Drive Axle Scale
to the Concrete Dead Space.
11. Set the Concrete Dead
Space Frame at the end
of the Drive Axle Scale.
─
Line up the Concrete
Dead Space Frame to
match the chalk. lines.
12. Bolt the Concrete Dead
Space Frame to the Drive
Axle Scale.
Place the Concrete Dead Space Frame
against the Steering Axle Scale.
Place the Drive Axle Scale against the first
Concrete Dead Space Frame.
Place the Concrete Dead Space Frame
against the Drive Axle Scale.