Gilderfluke&Co 8 Bit Digital Audio Systems - Manual (Page 27)

¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"k" Early Starts:
The user has the choice of what each card does when it is still playing a
spiel and receives a new 'start' or 'loop' command. The options are:
1) DO NOTHING.
2) JUMP FORWARD to the next spiel.
3) JUMP BACKWARDS to the start of the current spiel.
4) BANK START so that it won't be acted upon until the current
spiel finishes.
The JUMP FORWARD and JUMP BACKWARDS commands have the lowest
priority of all possible spiel requests. Any serial port or AUX PORT spiel request
will take priority over these commands.
This feature defaults to a setting of 'JUMP FORWARD'.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"l" #1 Priority PA Station:
NOT USED WITH AB-100 AudioBrick: In the Public Address System there
are a number of different ways to assign priorities to different PA STATIONS
and PA zones. This command allows you to assign a single PA STATION as the
top priority PA STATION. Any valid PA requests made by the top priority PA
STATION will be honored by this card at the exclusion of any other PA re-
quests. The top and second priority PA STATION assignments are usually
given to either a PA STATION which is local to the speakers which are con-
trolled by this card, or to a PA STATION from which safety announcements
will be made.
The top priority PA STATION defaults to a value of 01. Acceptable input
range is from 00 to FF.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"m" #2 Priority PA Station:
NOT USED WITH AB-100 AudioBrick: In the Public Address System there
are a number of different ways to assign priorities to different PA STATIONS
and PA zones. This command allows you to assign a single PA STATION as the
second priority PA STATION. Any valid PA requests made by the second priori-
ty PA STATION will be honored by this card at the exclusion of any other PA
requests except those from the top PA STATION. The top and second priority
PA STATION assignments are usually given to either a PA STATION which are
local to the speakers which are controlled by this card, or to a PA STATION
from which safety announcements will be made.
The second priority PA STATION defaults to a value of 02. Acceptable
input range is from 00 to FF.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"o" Standard PA Priorities:
NOT USED WITH AB-100 AudioBrick: In the Public Address System there
are a number of different ways to assign priorities to different PA STATIONS
and PA zones. If STANDARD and ZONE PRIORITIES are both off, then all valid
PA requests (from PA STATIONS other than the top and second priority PA STA-
TIONS for this card) will be treated equally. Any valid request will be hon-
ored, and if more than one valid request comes in to the same card, they
will simply be mixed.
If the STANDARD PA PRIORITY option is 'on', then PA STATIONS with higher
numbers will take priority over those with lower numbers. Only one PA re-
quest will be honored at one time.
G ILDERFLUKE & C O . ¥ 205 S. F LOWER ¥ B URBANK , C A 91502-2102 ¥ 818/840-9484 ¥ 800/776-5972 ¥ F AX 818/840-9485
19 of 72